Showing posts with label stand. Show all posts
Showing posts with label stand. Show all posts

Wednesday, March 5, 2014

Make a bent wood photo display stand

Keeping it simple
My favorite kinds of projects are simple ones. Not necessarily easy-to-make projects, but ones that embrace the aesthetic of simplicity. This project intentionally defies complexity: its a bent board with a slot in the edge.

I have made a few bent-lamination projects before. My most successful  attempt was a quilt hanger last year. This time I wanted to simplify the process more by eliminating the need to plane any wood and just ripping thin strips of wood on my table saw. It doesnt really matter how thick they are, mine varied as I moved the fence over for each cut. The thinner you slice the boards, they easier they will bend, but it may require laminating more pieces together to build up the completed thickness of the piece.

For my two photo stands I used five strips of wood each. I cut the middle strip "shorter" than the others to create the slot into which photos would sit. This is a great way to use some of that scrap wood youve been saving. If you are ambitious, I have a sneaking suspicion that these would sell fast at craft shows or maybe even Etsy. Plus it would have a pretty decent profit margin.

What to call it
As I mentioned in the video, I couldnt figure out what I would call this project so I enlisted help from my followers over on Keek. Nearly 100 people offered ideas. One of my favorites was from cbeer69 who suggested merely calling it "Dave". I love the simplicity of that! Unfortunately, very few people are likely to find my video on YouTube by searching for Dave.

The Inspiration Project
Be sure an visit this here web site on Tuesday for a new weekly feature. Im excited about it and eager to see how it develops and where it leads.

*****






Monday, February 10, 2014


The tv stand is finished! I played around with the floorplan a lot in Sketchup  (my go to program to make design decisions because it is fast and designing in 3D gives a much better understanding of the space)

I am still not entirely happy with the tv placement - it kinda screams hey! look at me! ... but with the space that we have, I think its a good option.


Utilizing one space for the office and living room, I wanted a sense of division which was created by the sofa, sofa table and lamps.  I also didnt want to block the window, putting the tv on an angle in the corner seemed the best option for the layout.

For now, this is where it will stay ... at least until I change my mind ;)

We wanted something super simple, not huge ... I feel like all tv stands are ginormous! So we decided to design and make our own ... I talked earlier this week about the door to hide the electronics and David managed to surprise me by his innovative pivoting door design, hes a keeper I tell you!

Here is how it moves ...



Pretty neat, huh?

The base construction for the tv stand was pretty simple but the pivoting door took a little more time to get just right


We topped it off with 2x4 (1" thick) shelving - we wanted something a bit heavier since it has to support the tv.


The screws and seams were covered with wood filler, once dry the whole piece was sanded to get all the rough spots - holes were also drilled for the hardware on the door at this time

I primed with SW wall and wood primer

lightly sanded with fine sandpaper

and gave it two coats of SW pro classic (perfect for painting furniture because it gives a hard enamel finish while being water based) in a custom mix of big chill with a little anew gray (both left over from other projects) with XIM extender mixed in to help level out brush marks.


I painted the top piece and the door separately to access all of the corners - once the pieces were dry, they were attached and the hardware was added.

And that was it!


Baskets fit well underneath to hold extra remotes and dvds


and a view with the door open ...


and I one of Annabelle  - she approves because her window seat (the green ottomans) are now back in place



The top piece $23 and the thin door $10 made this piece a little more expensive than anticipated ... the total for the wood was around $65

We sold our tv stand when we moved to CA, so it is nice to see the tv off of the ground!

Hope you have a great weekend!