Showing posts with label part. Show all posts
Showing posts with label part. Show all posts

Thursday, February 20, 2014

Part 2 Bowl cracking

Hi Everyone,

One of the bowls I made several weeks ago has developed cracking along one side of the bowl:



Working with green, unseasoned wood is always a crap shoot because of the drying of the wood.  As the fibers lose water they shrink in size and they also pull away from each other. Coupled with stresses in the wood blank that are caused by turning it into a circle, will cause distortion and at times cracks to appear.

As this crack goes through the wall of the bowl Im going to have to do some serious first aid on it.
First of all, it will be turned down almost to its final shape. Removing wood will relive some of the stress in the walls of the bowl. Secondly, its going to need to be treated with a product called Pentacryl.

Pentacryl is a wood stabilizer that was developed by museum curators to treat and restore old pieces of furniture that will crack over time. It replaces the water in the wood fibers and reduces the amount of movement in the wood as it dries out over time. Its non-toxic and doesnt interfere with the making or finishing of the bowl. Its an excellent product and if you are a wood turner who is reading this I highly recommend it.


Here is the bowl after about 45 minutes worth of turning:


I turned both surfaces of the bowl. Here you can really see the crack. If you look very carefully you can see the crack is radiating from a small knot in the wood:


Im going to treat the bowl with Pentacryl for the next several days and then place it back in the drying bags for a week or two. Well see this bowl again. Keep your fingers crossed that this works.



VW

Thursday, February 13, 2014

Northville MI project Shadowboxing Part II

Heres a good example of how to terminate the end of a piece of trim. I installed a new section of chair rail, which ends at an outside corner. By back-mitering the larger piece, I cut a smaller opposing piece, and glued it into place (DO NOT NAIL)!






And here Ive done more shadowboxing at the bay window to finish out the dining room. The next project will be chair rail and shadowboxing on the stairway - stay tuned!




Tuesday, January 28, 2014

An oak window seat Part 2

Installation day for the oak window seat.  This one starts out pretty standard with building a platform on the floor and covering it with mdf for a base.  Ive then built a small "wall" with 2x4s and applied the face that I made up and prestained in the shop.  Scribing is a critical skill here, because you want everything as tight as possible to the walls. Even though this house is only 3 years old, the walls are not totally square.






Thursday, January 23, 2014

Box making 101 Part III

Here are the final pictures of the finished boxes with the hardware attached. With darker stain I like to use a brighter brass hardware, and with lighter stain I like dark or antique hardware.

Happy thanksgiving!